Nexa3D Launches the Ultrafast, Affordable NXE 200 Industrial 3D Printer

ManufacturingNewsSales and Customer Support

By AIT News Desk On Apr 5, 2022

Nexa3D to launch the NXE 200 industrial 3D printer at AMUG 2022
The NXE 200 offers an excellent entry point into LSPc technology, aimed at designers, engineers, and manufacturers who need fast, accurate, and scalable prototyping and manufacturing solutions
LSPc enables 6.5x faster print speeds than competing technologies, plus exceptional surface finish
Nexa3D is offering a limited-time bundle that includes an NXE 200 printer, NexaX 2.0 software and an xCure curing unit all for just $49,990

Nexa3D, maker of ultrafast 3D printers, announced the release of the NXE 200 industrial 3D printer, an affordable entryway into Lubricant Sublayer Photo-curing (LSPc) technology. The NXE 200 is a natural expansion of Nexa3D’s portfolio, which also currently includes the NXE 400 industrial 3D printer and NXD 200 dental 3D printer, with the intention of broadening LSPc’s accessibility.

Latest Aithority Insights : Red Hat Adds Common Criteria Certification for Red Hat Enterprise Linux 8

“The NXE 200 offers extremely high productivity, in addition to superior accuracy, aesthetics, and mechanical properties, at the lowest total cost of ownership. Nexa3D intends to reach as many users as possible, and the NXE 200 will make LSPc more widely available.”

Designers, engineers, and manufacturers who need fast, accurate, and scalable prototyping and manufacturing solutions will benefit from the NXE 200. The system offers not only 6.5x the speed of competitive resin 3D printing technologies but a spacious build volume of 8.5L and build area of 275 x 155 x 200mm. With this combination of speed and volume, users can produce large parts and production runs of smaller parts in a fraction of the time required by other 3D printers.

“Consumers should not have to accept tradeoffs between quality and affordability,” said Michele Marchesan, Nexa3D Chief Revenue Officer, Industrial Products. “The NXE 200 offers extremely high productivity, in addition to superior accuracy, aesthetics, and mechanical properties, at the lowest total cost of ownership. Nexa3D intends to reach as many users as possible, and the NXE 200 will make LSPc more widely available.”

Nexa3D offers a large selection of materials for use with the NXE 200, along with its intuitive and user-friendly NexaX 2.0 software, which enables intelligent build optimization, process stability, and print consistency. Closing out the validated workflow are xWash and xCure post-processing technology. Each of these elements is fast and easy to use, eliminating wasted time in print preparation and post-processing.

Browse The Complete News About Aithority: Arturo Expands Offering with an Intelligent Portfolio-Level Risk Engine

The NXE 200 includes Nexa3D’s proprietary Everlast 2 membrane, a key component to LSPc’s speed and which, thanks to its long lifespan, results in more printer uptime and lower consumables costs. The printer’s 4K LCD light engine eliminates light diffusion near the part’s edges, resulting in exceptional accuracy and surface finish. Uniform exposure and process control with high power and irradiance enable strong cure at each layer for better mechanical properties.

The NXE 200 is priced at $49,990 with installation included, and for a l***********, the printer comes bundled with Nexa3D’s high-capacity xCure curing unit and NexaX 2.0 software. This offer is good until the end of May.

The affordability of the NXE 200 goes beyond its price point. Built from industrial hardware with modular components, the 3D printer is easy to service and affordable to upgrade, resulting in a long-lasting, reliable machine.

[To share your insights with us, please write to sghosh@martechseries.com]